PS3 Honey Search

News About PS3

Requests are open. Make your request
PS3 4.30 CFW Released Enjoy new games with FW upto 4.30 without any Eboot fix. If you had previously fixed 3.55 CFW games Replace those fixes with original Files/Eboots/sprx
Download PS3 Fonts For Your PC:

Downloaders

How To Jailbreak/Hack PS3

What does Hacking/Jailbreaking PS3 Means?
Jailbreak/Hacking PS3 means we make our PS3 able to play downloaded games on our consoles, this can be done by installing a free FW on our PS3's. We call it a Custom Firmware(CFW). CFW allow us to play downloaded games. Its just a simple software in a form of Firmware(FW) update. Install it as we install a FW.


What is True Blue Dongle?
True Blue Dongle is a USB device, a new jailbreaking device for PS3. Unlike CFW, we have to buy it. Its not free. But at the moment to play newer games we need it or similar clone USB Dongles to play newer games. Its eboots and other things are free though, but they are useless without these Dongles.


Jailbreaking/Hacking PS3:
To jailbreak your PS3 its very easy if your console is on 3.55 Firmware(FW). But If your FW is Higher then 3.55 then you need to Buy E3 Flasher to Downgrade it 1st to 3.55.

E3 Flasher:
E3 - Site

Don't know How to downgrade. But when you buy the E3 Flasher they will give you tutorials on how to downgrade.

Why To downgrade?
Because at the moment only 3.55FW hack is available.

Why Kmeaw 3.55 CFW?
Kmeaw 3.55 is best CFW out. There are lots of errors users face while installing PSN games, fixes, and other stuff on other CFW. But on Kmeaw everything runs smooth. Then no need to worry, because all games will work.

What is multiMAN?
multiMAn is the best Backup Manger out yet used to load the backups of the games. Means when you downlaod a game, it can only be run through a backup manager and multiMAN is best with lots of good feaatures.

BDEMU:
BDEMU is used to load the multiMAN. Just install it once and Done.


<=================>

How to Jailbreak/Hack:
1st cheeck your PS3 FW. If you are on 3.55 or less then it will good to go.

1. Download 3.55 OFW and 3.55 CFW- If you are on lesser FW.
3.55 OFW - 3.55 Kmeaw CFW






2.Download 3.55 Kmeaw CFW if you have 3.55 OFW or on 3.55FW already.
3.55 kmeaw CFW






  3. Now install the OFW 1st if you are on lesser FW. By simply putting the downloaded file in the folder "UPDATE". Then put this folder in a new folder called "PS3"



-> Save in the “PS3” folder > “UPDATE” folder
-> File name: Save as file name “PS3UPDAT.PUP”

OR
-> PS3/UPDATE/PS3UPDAT.PUP

How to Update:
From the home menu, select Settings (Settings) > System Update (System Update), and then press the Close button. 


See pics
http://q.gs/11NmQ
http://q.gs/11NmS
http://q.gs/11NmT


Installing Kmeaw CFW: - CFW hacks our PS3 into loading downloaded games
After installing the 3.55 OFW, install the Kmeaw 3.55 CFW in the similar way you installed the OFW, also rename the file and install




-> Save in the “PS3” folder > “UPDATE” folder
-> File name: Save as file name “PS3UPDAT.PUP”

OR
-> PS3/UPDATE/PS3UPDAT.PUP

Done your PS3 is now Jailbreaked/Hacked


multiMAn:
multiMAN ver 04.02.00 FULL
multiMAN ver 04.02.00 Base
[UPDATE v04.05.00 Released!] mmOS: Multiman like desktop environment Full Version - Mirror
mmCM - 04.05.00 BASEPLUS - Mirror


BDEMU 2:
BDEMU 2 for 3.55


<=================>


How to use ReActPSN:

1st download these Files:
ReActPSN_v2.00:
ReActPSN

Patched Vsh_Self Files: - For All CFW's
Vsh_Self

There have been reports of red screens of this but they are errors with vsh.elf, not following the steps correctly and reinstalling CFW through the recovery menu fixes.


ATTENTION:
YOUR USB DRIVE MUST BE ON THE MOST RIGHT SLOT (NOT LEFT)
AND ANY USB MUST BE UNPLUGGED. Only USB DRIVE FROM THE RIGHT - usb_000 or usb_001

For Kmeaw Users:

1. Extract Vsh_self.rar file. Goto 3.55 kmeaw folder copy (vsh.self) file to USB drive.
2. Transfer ReActPSN.pkg file to USB.
3. Attach USB to the most right of the PS3(Remember not to attach any other USB while doing it, so make sure all other USB slots are empty).
3. Run MM(multiMAN), goto settings tab in XMMB mode.
4. Now find dev_blind in the settings option - at the bottom almost
5. Enable dev_blind settings.
Note:
Use MULTIMAN to write vsh.elf to dev_blind via file manager. You will need to enable write acces to /dev_flash at the bottom in settings

6. Now goto MM file manager mode(SELECT + START)
7. Now navigate to  /dev_blind/vsh/module , now copy the vsh.self file here.
8. Now go back to dev_blind setting and disable it.
Imp- Its very important to disable dev_blind after copying the vsh.self file.

After done copying, return to settings and disable write access to dev_flash. (overwrite)
Restart the console.

9. Now install ReActPSN.pkg.


10. Run ReActPSN and hold R1 during the restart process should only take about 5 seconds. (Holding R1 will make a ReActPSN folder on the base of your usb drive with 2 folders in it "BK0001" and "pubPSN")

11. The BK0001 folder contains a backup of all the users on the system. The pubPSN folder contains all of the .rif and act.dat on the system converted into .rap/.edat format. The pubPSN folder is the one we are wanting. 

12. Copy the exdata folder from pubPSN to the base of your USB drive. So it should looks like this in a File browser/manager "usb drive"/exdata/".rap files" - You can delete pubPSNfolder. after copying exdata folder from it.

13. Make a new user, name it ''aa'' (without quotations)

14. Run ReActPSN again *do not push anything this time (it will rename user "aa" to reActPSN v2.0 xrif xedat )

15. When it's done (won't take long) it'll restart your console.

16. You'll notice aa has been renamed to something longer.

17. That's it. You are DONE

If you want to add more content to the account at a later time just add the .rap files to the exdata folder you copied earlier to the root of USB, rename the user back to "aa" and run reActPSN again. Then just install the content you are wanting to add.
If you have deleted the exdata folder, then you can make a new folder and rename it simply to "exdata" at the root of USB



For Rebug 3.55.2 USers:

- Extract vsh.elf and use the one designated for your CFW or patch your own vsh.elf for your CFW. Once 

NOTE: If you have any other CFW other than the one provided, or your OWN CFW than you've got to patch your CFW. 

- Now, for the REBUG users, you've got to put your console into NORMAL mode first. Now, go download the latest REBUG SELECTOR if you haven't already. Open your console, go to REBUG SELECTOR, change your console to MODE: NORMAL - XMB: DEBUG. After, restart your console.

- Now connect your usb drive on the far right slot either usb_000 or usb_001.

- Next open exdata.rar -> exdata, 
Extract that one exdata folder into whatever USB Stick or HDD you use on your console. (so it looks like exdata/files and NOT exdata/psn146/exdata)

- Now extract ReActPSN2.0.pkg and install onto your ps3.

- Use MULTIMAN to write vsh.elf to dev_blind via file manager. You will need to enable write acces to /dev_flash at the bottom in settings.

- Once enabled go to /dev_blind/vsh/module and copy over the 3 vsh.elf files

- After done copy return to settings and disable write access to dev_flash. (overwrite)

- Restart the console.

- Run ReActPSN and hold R1 during the restart process should only take about 5 seconds. (Holding R1 will make a ReActPSN folder on the base of your usb drive with 2 folders in it "BK0001" and "pubPSN")

- The BK0001 folder contains a backup of all the users on the system. The pubPSN folder contains all of the .rif and act.dat on the system converted into .rap/.edat format. The pubPSN folder is the one we are wanting. 

- Copy the exdata folder in pubPSN to the base of your USB drive. So it should looks like this in a File browser/manager "usb drive"/exdata/".rap files"

- Make a new user, name it ''aa'' (without quotations)

- Run ReActPSN again *do not push anything this time (it will rename user "aa" to reActPSN v2.0 xrif xedat )

- When it's done (won't take long) it'll restart your console.

- You'll notice aa has been renamed to something longer.

- That's it. You are DONE

- If you want to add more content to the account at a later time just add the .rap files to the exdata folder you copied earlier rename the user back to "aa" and run reActPSN again. Then just install the content you are wanting to add.


NOTE: You need your act.dat tied to the .rif to create valid .rap.

NOTE 2: - SUPER IMPORTANT - LISTEN:

FW = rebug/normal
XMB = Normal/Debug

Normal and debug are the settings you want to use for react, or else you might have Red Screen of DEATH (RSOD).


<=================>